
Advantage C3025S 5.1 home cinema cable-set 30 m²
5.1 home cinema cable set for rooms up to 30 m²

An exceptional piece of Teufel kit: the Columa 250. Glass as an accent building material delights the eye of the beholder, while the sound of a true Teufel Audio system delights the ear.

With a 24 liter volume and nearly 14 kg, this active subwoofer is perfectly equipped to deliver extra depth and punch to home cinema and music.
The slender form takes up very little space, yet accommodates a downward radiating 200 mm woofer - the secret to this subwoofer's performance which is miles above its price class. The low end is 40 Hz (-3 dB). Thanks to an integrated amplifier with 100 watts, the bass has a dynamic and precise sound. An internal limiter protects the drivers from overmodulation and distortion.
A mono cinch connection for connecting to a home cinema A/V receiver and phase switch are located on the back.
An auto level switch with three levels ensures the optimal alignment to the various output levels from different home cinema A/V receivers. This ensures that the subwoofer always springs into action when a signal is available.
The attractive yet discreet form is accented by high gloss elements and rounded corners. The downfire principle, bass reflex vent on the bottom, and angled, embedded power plugs allow the US 2108/1 SW to be positioned directly against the wall. Four resonance damping feet ensure stable placement and uncouple the subwoofer from the floor.
The US 2108/1 SW is only available as part of a Teufel set.
| Description | Item |
|---|---|
| Width | 28 cm |
| Height | 50 cm |
| Depth | 28 cm |
| Weight | 13.6 kg |
| Description | Item |
|---|---|
| Cinch input | 1 |
| Description | Item |
|---|---|
| Power supply voltage | 230 V AC / 50 Hz V |
| Automatic on/off | Yes |
| Maximum power consumption | 250 W |
| Mains cable - IEC connector (non-heating device) | Yes |
| Safety class | 2 |
| Fuse | Yes |
| Storage for settings when disconnected | Yes |
| Standby-Function | Yes |
| Standby-Power consumption | 0.5 W |
| Bass boost/EQ | Yes |
| Input gain adjustment | Yes |
| Level control | Yes |
| Phase control | 0 / 180° |
| Power output capacity sinus (RMS) Bass | 100 W |
| Power output capacity impulse (peak) Bass | 120 W |
| Amplifier configuration | 1.0 |
| Amplifier technology | Class D |
| Amplifier channels | 1 |
| Description | Item |
|---|---|
| Lowest frequency (-3 dB) | 40 Hz |
| Suitable for AV receiver | Yes |
| Equalization port (position) | Bottom |
| Equalization port | 1 |
| Diameter of the stand screw threads | 6 mm |
| Cabinet material | MDF |
| Cabinet surface | High gloss (front), foil (corpus) |
| Magnetic shielding | Yes |
| Net internal volume | 24 L |
| Integrated stand | Yes |
| Woofer (number per enclosure) | 1 |
| Woofer (diameter) | 200 mm |
| Woofer (material) | cellulose |
| Continuous power handling (IEC - Long Term) | 100 W |
| Sensitivity (2.83 V / 1 m) | 87 dB |
| Frequency range | 40 - 250 Hz |
| Peak power capacity (IEC - Short Term) | 250 W |
| Maximum sound pressure level | 109 dB/1m |
| Acoustic principle | 1-way-system |
| Enclosure type | Bass reflex |

The CL 250 FCR rear speaker is optimised via klippel and its 80 mm deep-midrange driver and the 19 mm fabric tweeter with its Neodym magnet. In construction and development, this rear speaker is identical to the centre speaker. You can mount this speaker either on stands or place on the wall, thanks to the integrated wall mount.
| Description | Item |
|---|---|
| Width | 15 cm |
| Height | 50 cm |
| Depth | 7.2 cm |
| Weight | 2 kg |
| Description | Item |
|---|---|
| Terminal clamps | Screw terminals |
| Minimum amplifier output power recommended | 20 W |
| Description | Item |
|---|---|
| Suitable for AV receiver | Yes |
| Maximum cable diameter | 2.5 mm |
| Removable front cover | Yes |
| Cabinet material | Plastic + glass |
| Cabinet surface | Lacquer, matte + glass |
| Magnetic shielding | Yes |
| Net internal volume | 2.7 L |
| Keyhole plate mounted | Yes |
| Wall mounting brackets | Yes |
| Tweeter (number per enclosure) | 1 |
| Tweeter (diameter) | 19 mm |
| Tweeter (material) | Textile |
| Bass/Midrange driver (number per enclosure) | 2 |
| Bass/Midrange driver (diameter) | 70 mm |
| Bass/Midrange driver (material) | Cellulose |
| Continuous power handling (IEC - Long Term) | 60 W |
| Sensitivity (2.83 V / 1 m) | 85 dB |
| Frequency range | 120 - 20000 Hz |
| Peak power capacity (IEC - Short Term) | 100 W |
| Maximum sound pressure level | 97 dB/1m |
| Impedance | 4 - 8 Ohm |
| Crossover frequency to Woofer (recommended) | 150 Hz |
| Acoustic principle | 2-way-system |
| Enclosure type | Closed |
| Crossover frequency internal switch | 2400 Hz |

The center speaker in its landscape format is the equal to the column speakers, having identical kit inside. The two midrange drivers and tweeter are set back in their glass housing as well. This is how we keep the design of this system fresh and looking bright while providing fantastic speech intelligibility.
The CL 250 C is designed for two separate setup possibilities: either you set it on the shelf or you mount it directly to the wall by the integrated wall mount.
| Description | Item |
|---|---|
| Width | 50 cm |
| Height | 15 cm |
| Depth | 7.2 cm |
| Weight | 2 kg |
| Description | Item |
|---|---|
| Terminal clamps | Screw terminals |
| Minimum amplifier output power recommended | 20 W |
| Description | Item |
|---|---|
| Suitable for AV receiver | Yes |
| Maximum cable diameter | 2.5 mm |
| Removable front cover | Yes |
| Cabinet material | Plastic + glass |
| Cabinet surface | Lacquer, matte + glass |
| Magnetic shielding | Yes |
| Keyhole plate mounted | Yes |
| Wall mounting brackets | Yes |
| Tweeter (number per enclosure) | 1 |
| Tweeter (diameter) | 19 mm |
| Tweeter (material) | Textile |
| Bass/Midrange driver (number per enclosure) | 1 |
| Bass/Midrange driver (diameter) | 70 mm |
| Bass/Midrange driver (material) | Cellulose |
| Continuous power handling (IEC - Long Term) | 60 W |
| Sensitivity (2.83 V / 1 m) | 85 dB |
| Frequency range | 120 - 20000 Hz |
| Peak power capacity (IEC - Short Term) | 100 W |
| Maximum sound pressure level | 97 dB/1m |
| Impedance | 4 - 8 Ohm |
| Crossover frequency to Woofer (recommended) | 150 Hz |
| Acoustic principle | 2-way-system |
| Enclosure type | Closed |
| Crossover frequency internal switch | 2400 Hz |
Please check whether required cables are included.